RZR 4 1000 2014-2022 S, Turbo, Dynamix / RZR 4 900 2015-2022 Rear Bench Seat (WILL NOT FIT PRO MODELS)
Change your RZR 4 1000 2014-2022 & 900 2015-2022 into a 5 Seater
- One Rear Bench seat made of vinyl
- (3) UTVMA 4 Point Harness with sewn in harness pad and chest buckle
- CONSOLE DELETE KIT INCLUDED
- All Mounting hardware (You will need the 2 stock mounting brackets off the stock seats)
- Installation instructions
- Width of the bench seat: 45 inches (custom make for the RZR 4!)
- RZR 4 1000 Rear bench seat has two head rests (as pictured)
- RZR 4 1000 Rear bench seat also works with the RZR 900 2015-2022
-Install time is about 2.5 hours
The seat was fine except no water drain, to get the seat out ,you have to unbolt the bottom seat belts !!! my 4th time going to put riders it the back ,all 3 seatbelt latches would not unlatch, very bad safety issue if it flips over especially in water, very ,very dangerous !!! I lube them and there still stuck !!!! very disappointed !!!!
Phil 2018 rzr highlifter 4 seaterPensacola,fl
I have had this seat a little over a year and it’s pretty nice kids fit great in it it could be greatly improved by cutting couple access holes in the back of the seat to get to the seat latches So factory hardware can be used and it would help drain water . I had a latch hang up on me and I could pull on the attached cord all day and it wouldn’t unlatch as you can see from the picture I had to bust the plastic bracket to get it out . Maybe lube if the latch assembly when you have it out I dunno but huge pain if the latch fails just a heads up
For the amount of money this seat is it has been the worst experience! From the directions that it came with to the slots for the straps to go through not being cut. To get a hold of some one with multiple voice-mails being left. To then finally getting a hold of someone and they tell you to send pictures... after waiting for someone to contact me the calling process began again for a whole week for someone to answer and tell me they forgot to cut the wholes and to cut them myself..... did that finally got the bench seat put in and know it will not come out! The release strap does not work on the driver side!! And yes it was connected properly because the passenger side works just fine. I have yet again started the calling process with no luck. 10 out of 10 worst experience with this product and company.
Bit of a pain to install solo, but I accomplished the goal, super happy how everything turned out
Great seat would be even better with drains and quick release for the belts.
Works great and kids love it.
Excellent fit and great ride! Will be buying more UTVM harnesses love the comfort.
Like the way it looks. Love the 4 point harness, keeps the passengers secured. Easy to install.
Great seat!! Good quality. Easy instal. Fits perfect and we can now take all 3 kids comfortably! Highly recommend this product.
It had made it so much easier to get outdoors with our kids! We wanted a RZR and needed more seating- this was the perfect solution!
Was expecting to be super stiff an uncomfortable but me an my coworkers sat in it for few hours since had it delivered to work worth spending the extra money over bump seat as middle passenger isn't 6 inches higher as well
Works perfectly for what we needed and wanted
The only thing that would make it better is if the center of the backrest was recessed. To allow clearance to get the seat back a couple more inches
Rear bench is awesome, will fit three kids not adults.
The seat shipped the same day I ordered it. Fit perfectly. Install took about 3 hours. Very high quality. We are extremely satisfied.
Our kids LOVE it! We have a 5 year old, 7 year old and 10 year old and they all fit perfect in it. We feel so safe having the kids in harnesses. It was relatively easy to install. We had one issue with one release strap being too short and UTVMA was quick to resolve it and send us a new one! Highly recommended.
I read several reviews prior to purchasing this seat. I’m not quite sure why so many people had an issue with installation. Some said it took several hours. It took us less than 2 hours and was fairly self explanatory. The seat is great for our 3 kids who love to ride and will now do so in comfort. The seat was delivered within 3 days of ordering The only thing that would have made this seat better, would have been to have lime squeeze as a color option to match our RZR but overall we’re extremely pleased.
The fitment was great, seat is comfortable and the stitching / material is great quality. Shipping was faster than estimated and it made it here in time for our trip. Great product and it has more room than I thought it would. Console delete looks clean and fits pretty good. Thanks guys!
Instructions were not detailed how they should be.
We received the seat which was packaged well, and came perfectly intact. Installed fairly easy, and the finished product looked amazing. Would recommend to anyone looking for a quality bench. Kids love it!!
Absolutely love this seat. Took my father & husband no time to install it. Definitely going to getting another soon.
Awesome bench seat. I have three kids under the age of 8 and wanted to make sure all of them can ride with us safely and comfortably. They love it. We have ridden as long as 8 hours in a day and they never once complained of being uncomfortable. I am very happy with the bench and the harnesses that came with it.
Only 2 minor problems, the install instructions are kind of sparse, made for a lot of trial and error, on top of that there are some apparently some small design changes in the 2019 model that I had to work through. It took a while, but I got it all situated. The other slight issue, is that it cannot sit as far back as the stock seats and as some other bench models I have seen, so leg room is limited. It isn't comfortable for an adult to sit in the back, but it still works great for my kids.
Eat directions for installing this left a whole lot to be desired… While I expected this to be a very simple past it took me close to seven hours to complete the install. What are the directions to fail to mention or the power wires running through the center consul… And in less you want your children stepping all over them every time they get in and out you have to relocate them which means pulling all the wiring out of The machine and re-routing it. This was a chore. Additionally the two pieces that replace where the center consul go are poorly designed and leave gaps in the floorboard.
We needed seating for five and a bench accomplishes that for us… However I did expect more out of the design and instructions for install.
Super easy to install and now the whole family can go !
Good item a little difficult to install to match the rails of the bottom of the seats
These seats are more comfortable than the stock seats, and more safer for kids also. Took about three hours to install, the hardest was removing original seat belts!
Easy install! Took about 2 hours to remove old seats and hardware and about an hour to install new seat! Everything is has advertised!
Shipping was super fast! Communication was great every step of the way. Seat did show up a little scuffed up but it's going in my Razor to be abused anyways. Seat showed up double boxed so the seller did there part. I blame the shipping company. Extremely happy with the way it turned out! Will be back for more parts soon! Thanks!
Picked up this bench seat for our 3 kids and couldn’t be happier. Instructions were super easy to fallow and fit perfect in my 2018 rzr xp 1000. Quality is awesome A+++
Thank you! The seat will work perfectly for our family. It is well made and I feel good about the security it will provide. Thank you again.
2017 Rzr bench seat
Well I took a chance with the seat and for the most part it is nice. The seat looks rugged and hopefully it will last. So to start from the beginning, from ordering, everyone should know that you can pay the $100 shipping to a business instead of the $200 to your residence. The business address is the actual shipping company which you can pick up the delivery from them at their distribution center. Once I picked up the seat I checked the seat out for any flaws especially since it was made in china. I found about an inch of stitching that could be future issue. Beside that the seat looks nice besides for the money. Next when I went to install the instructions were lacking and are slightly different then the video on the website. I called the owner for some insight. The lower seat belt connections I connected the bolts the way I believed it should go, the instruction pictures were not clear. You do need to install the base of the seat and slide the bench as far back as possible on those bases. For putting the seat belts through the seat slots there is no insert installed and there is no slot pre-made through the foam. You have to actually cut the foam with a knife carefully to make the slots. Then you can put the belts through the slots.
2015 Rear Bench Seat
Great seat, Great Service,.......Highly Recommended!
Chris, hope you enjoyed AZ and the game's outcome!!
Great seat my kids love it. Great staff that goes the extra mile. Two thumbs up
Utv Mtn bench seat & harness
Love it so far, 1st ride will be Snakehunt at Little Sahara in Waynoka Ok. Quality is as good and looks just like the Twisted Stitch for a lot less $ and 3 harnesses!!
Recommended for the RZR 4 1000/900 Rear Bench Seat